Oil Pressure Fix

Description

ECU oil pressure calibration software for VAG, BMW, Ford and Stellantis

 

Oil Pressure Fix is a professional ECU file modification tool designed to optimize

engine oil pressure control in selected VAG, BMW, Ford and Stellantis diesel and petrol engines.

The software modifies ECU binary files read with popular tuning tools such as

Magicmotorsport FLEX, AutoTuner, KESS, CMD Flash, dFox and other professional ECU programmers.

The main purpose of the software is to modify factory oil pressure control strategies that may reduce oil pressure,

particularly at lower engine speeds and loads. Increasing the requested oil pressure can help improve lubrication

conditions in supported engines.

Supported ECU families

Oil Pressure Fix supports the following ECU families on selected software versions:

New in Oil Pressure Fix 6.10.5.117: Ford Delphi DCM6.1 and PSA Delphi DCM6.2A support, adding ECU identification and oil pressure control calibration modifications for compatible Ford, Peugeot and Citroën software.

Volkswagen Group

Selected Volkswagen, Audi, SEAT, CUPRA, Škoda, Porsche, Bentley and Lamborghini applications:

• Bosch EDC17: EDC17CP14 (V6/V8), EDC17CP24 (V6/V8), EDC17CP44, EDC17CP54, EDC17C64 and EDC17C74.
• Bosch MD1: MD1CP004, MD1CP014, MD1CS004 and MD1CS014.
• Bosch MED17: MED17.1.x and MED17.5.x families (including MED17.1 and MED17.5), on selected supported software versions.
• Bosch MG1: MG1CS002, MG1CS008 and MG1CS011.
• Continental: SIMOS18.
• Delphi: DCM6.2V.

BMW

• Bosch EDC17: EDC17C50 for supported B47 applications.
• Bosch MD1: MD1CS001, MD1CP002 and MD1CP032.

Ford

• Bosch MD1: MD1CS005 on selected supported software versions.
• Delphi: DCM6.1.

Stellantis and Toyota applications

Selected Peugeot, Citroën, DS, Opel, Fiat and Toyota applications:

• Bosch: MD1CS003.
• Delphi: DCM6.2A (PSA), DCM7.1A and DCM7.1B.

Compatibility depends on the ECU software version, not only the ECU family or vehicle badge.

The application checks modification availability after you open the file. A listed family does not mean every software revision is supported.

Selected EDC17CP44 files also support adjustable idle speed up to 1000 RPM.

For supported DCM7.1 A/B files, additional functions include Start/Stop deactivation.

Why modify the factory oil pressure strategy?

Many modern engines use electronically controlled oil pressure systems that adjust oil pressure depending on

engine speed, engine load, oil temperature and other operating conditions.

In some applications, the factory calibration can request relatively low oil pressure during

low-RPM and low-load operation. These strategies are commonly used to reduce the mechanical load on the oil pump,

improve engine efficiency and reduce fuel consumption and emissions.

However, lower oil pressure may also reduce the lubrication reserve available to critical engine components,

especially during prolonged low-RPM operation or in engines with higher mileage.

Oil Pressure Fix allows professional tuners and automotive workshops to modify these calibration parameters directly

inside the ECU binary file.

The software automatically identifies supported calibration areas and applies the required changes without the need

to manually search for oil pressure maps, switches or related calibration values.

Simple One-Click ECU File Modification

Using Oil Pressure Fix is simple:

1. Read the original ECU file using your preferred ECU programming tool.
2. Open the binary file in Oil Pressure Fix.
3. Apply the available oil pressure modification.
4. For supported EDC17CP44 files, adjust the idle speed if required.
5. Save the modified ECU file.
6. Write the modified file back to the ECU using your programming tool.

Compatible ECU Programming Tools

Oil Pressure Fix works with binary ECU files read using most professional ECU programming tools, including:

• Magicmotorsport FLEX
• AutoTuner
• Alientech KESS
• CMD Flash
• dFox
• and other professional ECU read/write tools

The ECU file must contain the required calibration data in a format supported by the current Oil Pressure Fix version.

If a software version is not recognized, please contact our support team.

EDC17CP44 Idle Speed Calibration

For EDC17CP44 ECUs, Oil Pressure Fix also provides an additional idle speed calibration function.

Depending on the ECU software revision, the factory idle speed may be calibrated at approximately 700 RPM or 780 RPM.

In some EDC17CP44 software revisions, the factory setting of approximately 700 RPM is relatively low for optimal oil pump operation. At such a low engine speed, the oil pump also operates at a lower rotational speed, which may result in lower oil pressure and reduced oil flow at idle.

Oil Pressure Fix allows the user to smoothly adjust the engine idle speed according to the requirements of the vehicle. The idle speed can be freely increased up to 1000 RPM.

Adjust EDC17CP44 Idle Speed Directly in Oil Pressure Fix

The idle speed modification is integrated directly into Oil Pressure Fix.

After opening a supported EDC17CP44 file, the user can select the desired idle speed without manually searching for the relevant calibration maps.

EDC17CP44 idle speed adjustment directly in Oil Pressure Fix software.

EDC17CP44 Idle Speed After Modification

The selected idle speed is written directly into the ECU calibration.

This allows the tuner to increase the engine idle speed from the original factory value and select a value better suited to the required oil pressure strategy. The example below shows the calibration after modification.

Example of the modified EDC17CP44 idle speed calibration.

This additional function gives professional ECU tuners more control over EDC17CP44 low-RPM operation and makes it possible to combine oil pressure optimization with idle speed calibration in a single tool.

Software Compatibility and Requirements

• Operating system: Windows 7 SP1, Windows 8, Windows 8.1, Windows 10 or Windows 11 on an Intel/AMD PC.
• 32-bit application (x86): runs on 32-bit and 64-bit editions of the listed Windows versions; Windows 11 requires a 64-bit system.
• Older Windows versions: install the available system updates and current trusted root certificates. HTTPS connections must support TLS 1.2; Windows 7 SP1 also requires SHA-2 support.
• A stable internet connection is required during software use, including installation, activation, license verification, access to supported ECU modifications and software updates.
• Each license is valid for one computer only.
• The license is assigned to the activated computer and is non-transferable.
• The software is not designed for installation or operation inside virtual machines.

Activation and licensing

Current Oil Pressure Fix versions use online activation inside the application. Enter the email address associated with your OPF license and confirm the verification code sent to that address.

A stable internet connection is required during software use, including activation, license verification and access to supported ECU modifications. Follow the instructions supplied after purchase. If your purchase is not recognized or you need activation assistance, contact our support team by email or WhatsApp.

License type: perpetual license for one computer.

Single-Computer License

Each CTN Software product license is intended for use on one computer only.

The software may be used for personal or professional purposes by the original license holder.

Non-Transferable License

The license is non-transferable. It may not be sold, rented, leased, sublicensed or redistributed to another person

or company unless otherwise agreed in writing by CTN Software.

Software updates and ongoing development

Oil Pressure Fix is continuously developed. Support for additional ECU software versions and control units may be introduced in future updates.

Although the software is extensively tested before release, ECU software can differ depending on vehicle model,

engine version, production year and ECU software revision.

If your ECU software version is not recognized, or if you encounter a problem with a supported ECU,

please contact our technical support team.

Oil Pressure Fix for Professional ECU Tuners

Oil Pressure Fix is designed for professional ECU tuners, automotive electronics specialists and workshops

working with modern diesel and petrol engine control units.

Instead of manually locating the relevant calibration data in WinOLS or other ECU editing software,

the user can apply supported oil pressure modifications quickly and consistently.

Depending on the ECU family, available functions may include:

• oil pressure strategy modification,
• increased requested oil pressure,
• low-RPM oil pressure optimization,
• EDC17CP44 idle speed calibration up to 1000 RPM,
• DCM7.1 A/B Start/Stop deactivation,
• automatic detection of supported ECU software versions.

Save 15% with the OPF + ETF software bundle

Contact and Technical Support

For questions regarding ECU compatibility, software activation, licensing, delivery or technical support,

please contact CTN Software:

• Email: support@ctnsoftware.com
• Phone / WhatsApp: +48 513 109 304

We are committed to providing professional technical support and continuously improving Oil Pressure Fix

based on new ECU software versions and customer feedback.

Thank you for choosing CTN Software.

CTN Software Terms and Conditions

CTN Software Privacy Policy

CTN Software Return and Refund Policy

CTN Software Delivery Terms